Client Project Update 2

First off: following last week’s PRP lecture, where the research project being discussed was practically the same as mine with a different title, I’ve done a rethink of my current and upcoming artefacts and come up with a game plan – however, this did leave me with not as much time as I’d like to get responses for my current artefact, so I’m planning on proposing my presentation till next week. Also, I’ve caught a chest cold which has rendered it a bit difficult to talk for prolonged periods without getting wheezy and start coughing. I really want to get this right, and if that means pushing things back a week then so be it.

Onto Client, and I will admit it’s been a little neglected due to the PRP (my brain goes into a certain mode and doesn’t come out of it for a few days; it gets a little tiresome at times). But I am entering the final stages before sending them off to my client for a final once-over, so you’re getting a backlog update.

My client thought the second cover design was the strongest of the two, but was a little concerned about the religious imagery being a little too overt. So I went for the idea of it being a huge machine of some sort in a nebula billowing gas and creating new stars. I also added in a spacecraft to give a better sense of scale (i.e.: this thing is huge).

I always seem to lean towards to the surreal when it comes to things like this, and as I was sketching a design for the machine I decided to make its face resemble The Scream, with the open mouth having gas pouring from sort of like the “breath of life.”

I started blocking the shape in for the robot which is coming out really well. But at some point, I’m not sure when exactly, I looked at it and thought the composition was off, so I shrank everything so that it wasn’t taking up most of the frame. The colour of the robot is bothering me a lot though, and I think I need to make it blend into the colour of the nebula more since the idea is to have it mostly shrouded in gas.

For the other cover, my client was concerned that the two were too similar in theme (he was right; as previously mentioned my brain goes into a certain mode and refuses to come out of it), and gave a few suggestions to explore. One of them was “if dragons developed a society what would a member of a religious order look like?” There are no prizes for guessing what happened next – especially after I realised that I had already been playing with the same idea for the past few years in my spare time. I’ve been actively avoiding dragons in my work these past three years (not counting my Norse myth board game which had a couple), but by this point I’ve really begun to miss having the opportunity to paint huge “badass” dragons so I leapt at the chance and immediately sat down to work through the idea in my sketchbook:

It ought to be noted that when it comes to dragons I tend to avoid giving them armour and such – I’m rather logical with these kinds of things and the question keeps popping up as to how they would craft them in the first place seeing as they haven’t the hands for it. Also, much like a stag or gorilla, it makes sense that they would more likely grow any signs of status as part of their biology rather than use adornments.

I tend to have problems with foreshortening in my art (I’ve never been able to judge distance very well), so I make use of DAZ Studio to act as a reference model (no pun intended). The tie into the religion theme is that it’s pulling itself out of a temple (maybe it’s been stuck there, maybe it’s its cave with a fancy entrance; it could be either), hence the doorway visible at the back.

Also: DAZ Studio is the only program I have ever encountered that saves backwards. I’m not joking, the progress bar actually goes the wrong way at one point.

I was a bit annoyed with the pose I originally decided on, seeing as I’ve actually seen it a number of times in artwork. So I altered the angle (note: it is very hard to get any sort of sense of motion in these models). I did like the idea that it’s also using its wings to pull itself out of its hole, so that stayed in. Originally the mouth was closed because dragons with their mouths open are, to put it mildly, a bit overdone. But it just looked too passive, and passive isn’t a word I’d associate with a dragon of this design. So I did a reference with the mouth open as well.

The next 4 shots are various stages of the blocking (Wings 3D was used to create a rough horn as it was a pain to judge the perspective on it). The statues are very obviously a copy-and-paste job, but the head on the far one either needs reworking, or it gets hidden by the far wing (the latter is looking increasingly likely). The open mouth is still only half done as it’s rather tricky to sort out the angle of the bottom jaw. The neck needs reworking to add more tension into it, as does the far paw – I need to change it so it’s digging its claws into the step. I think I’ll also add in the remains of the head of the near statue as well to add something to the bottom of the image as it’s looking rather bare.

For the doorway, I’m currently looking these for reference:

The idea is to make the detail on the door look like it was carved with claws – meaning the detail isn’t as fine as the images here.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s